Auerswald COMfortel 1400 Service Manual Page 79

  • Download
  • Add to my manuals
  • Print
  • Page
    / 562
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 78
COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014 79
Telephoning
Call Waiting Calls
Switching off Call Waiting Tone
– Call waiting enabled
When call waiting signals that there is an incoming call, proceed as described in the following.
1. Select call deflection.
2. Tap on .
3. Enter the destination number or press the telephone book key to select the
telephone number you want in the telephone book.
Important: Enter telephone numbers exactly as when dialling, for example,
always enter external telephone numbers with a leading exchange line
access number. (exception: direct exchange access). The default exchange
line access number on the PBX is "0" in the factory settings; however, this can
be changed for several PBXs (see instructions for the PBX).
4. Tap on .
The subscriber is called.
Note: If the destination number is saved on the programmable function key
(speed dialling key), you can forward the call by simply pressing this key and
then confirming with . The previous function selection via the display is no
longer applicable.
Switching off Call Waiting Tone
Requirements:
– Call waiting enabled
When call waiting signals that there is an incoming call, proceed as described in the following.
1. Select call wait.off.
2. Tap on .
The second call will continue to try to get through and you can accept it at any time.
Page view 78
1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 561 562

Comments to this Manuals

No comments