Auerswald COMfortel 1400 Service Manual Page 155

  • Download
  • Add to my manuals
  • Print
  • Page
    / 562
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 154
COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014 155
Functions
Do-not-disturb
Configuring and Operating Function Key for Do-not-disturb
The configuration can be carried out as follows:
Using COMfortel Set
Using the telephone
Using COMfortel Set to Configure the Function Key for Do-not-disturb
1. Open the page Function keys > Assign function keys.
2. Click one of the following tabs:
3. Right-click the function key you want to assign.
A function selection dialogue opens.
4. Select the Do-not-disturb function.
The current settings for defining the key are displayed.
5. In the Kind of switching list field, select one of the following options:
6. In the Key name entry field, enter a name for the key. Possible entries:
Clicking automatically enters the default name in the entry field.
Note: The key name is used for printing the label.
Further steps:
LED signalling on the key:
Yellow The do-not-disturb function is enabled.
Off The do-not-disturb function is disabled.
Level 1: Keys are defined on the first key level.
Level 2: Keys are defined on the second key level.
switch off: Disables the do-not-disturb function.
switch on: Enables the do-not-disturb function.
switch over: Pressing the key switches the do-not-disturb function on or off.
Up to 16 digits
Digits and characters
Page view 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 561 562

Comments to this Manuals

No comments