Auerswald COMfortel 1400 Service Manual Page 228

  • Download
  • Add to my manuals
  • Print
  • Page
    / 562
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 227
228 COMfortel 1400 - Firmware Version 1.4 - COMfortel Set V3.6 - Operation and Configuration V01 04/2014
Functions
Configuration Switchover
Configuration Switchover Executed Manually
Configuration Switchover
If multiple configurations have been saved in the PBX, for example, for day, night, etc., switching
over from one configuration to another can be carried out manually and/or in a time controlled
manner.
Configuration Switchover Executed Manually
The execution can be made as follows:
Using the telephone
Requirements:
– At least two configurations set up in the PBX
– Authorisation in the PBX for Configuration switching
In order to switch over a configuration in the PBX, press the function key configured for config-
uration switchover.
Alternatively, proceed as described below.
1. Press the menu key and open the menu functions > switch config..
2. Select the desired configuration according to its name.
The configuration selected is switched on.
Configuring and Operating Function Key for Configuration Switchover
Press the key for general functions while the telephone is in the idle state to open the Config-
uration menu. After this, you can enable the configuration.
Press the key defined for configurations to enable the configuration that has been set up.
In addition, when functions are defined on the first key level, the status of the function is
indicated by the corresponding LED.
Page view 227
1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 561 562

Comments to this Manuals

No comments